HDMI to analog audio converter
Item no. 1013331
Intended use
This product is designed to decouple the audio signal from an HDMI signal. The audio signal is then available
via a stereo cinch output. Power supply via the included power adapter.
This product complies with the statutory national and European requirements. All company names and pro-
duct names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• Audio converter
• Power adapter
• Operating instructions
Safety instructions
In case of damage caused by non-observance of these operating instructions, the war-
ranty gets void! We are not liable for any consequential damage!
We are not liable for property damage or injuries caused by improper use or non-obser-
vance of safety instructions! Such circumstances will void the warranty!
a) General
• Unauthorized modifications and/or alterations to the product are not permitted due to safety and approval
reasons (CE). Do not disassemble the product.
• Have maintenance and repairs done by qualified personnel only.
• Do not leave packaging material unattended, as children could use it as a toy creating hazardous situa-
tions.
b) Power adapter
• The power adapter features a protection class II design. Only use a proper wall socket as voltage source
for the power adapter.
Connect the power adapter to a wall socket that can be accessed easily.
• Use only the included power adapter to power the audio converter.
• Never pull the cable when disconnecting the power adapter from the wall socket. Hold the power adapter
at the sides of the enclosure and then pull it from the wall socket.
• If the power adapter is damaged, do not touch it. There is a risk of fatal electric shock!
First disconnect the mains voltage supplying the wall socket to which the power adapter is connected (turn
off the respective circuit breaker or remove the fuse, then turn off the ground fault circuit interrupter in order
to disconnect all poles of the wall socket from the mains voltage).
Only then disconnect the power adapter from the wall socket. Dispose of the damaged power adapter
properly. Do not use it anymore. Replace it with a power adapter of identical construction.
c) Operation
• The device is not a toy. Keep devices to be operated by mains supply away from children. Use extreme
caution when children are present.
Operate the product out of reach of children.
• The product is only suitable for use in dry, closed indoor areas. The complete product must not become
wet or damp. Never touch the product with wet hands!
In regard to the power adapter, there is a risk of fatal electric shock!
• When setting up the device, ensure that the cable does not get kinked or crushed.
• Never use the product immediately after it has been brought from a cold room into a warm one. The con-
densation generated could destroy the product. A wall plug transformer also poses the risk of fatal injury
due to electric shock!
Allow the device to reach room temperature before connecting and using it. This may take several hours.
• Avoid the following adverse conditions at the location where the product is placed, and during transport:
- wetness or high humidity
- cold or heat and direct sunlight
- dust or flammable gases, vapors or solvents
- severe vibration and blows of any kind
- strong magnet fields, such as near machines or speakers
Version 05/14
Connection and operation
• Choose a suitable place to set up the audio converter. Use a suitable pad to protect sensitive furniture
surfaces against scratching, spots or pressure marks when setting up the audio converter.
• Connect both cinch sockets labeled „LINE OUT“ to the audio output of your device, i.e. amplifier.
Red cinch socket = Right stereo signal („R“)
White cinch socket = Left stereo signal („L“)
• Connect the audio converter‘s HDMI socket to your playback device, i.e. to the ARC (Audio Return Chan-
nel) connection on your monitor/television or to an AV receiver.
• Connect the power adapter‘s low-voltage round plug to the corresponding socket on the converter.
• Connect the power adapter to a wall socket. The power LED on top of the audio converter lights up.
• Start your playback device so that a suitable signal is sent to the audio converter‘s HDMI input.
Then select the appropriate analog audio input, i.e. on your amplifier.
Troubleshooting
• Check all cable and plug connections. Replace damaged cables.
• Connect the audio converter‘s output (analog signal, line level) to an analog audio input with line level (i.e.
your amplifier‘s AUX-IN).
• Make sure that the right input and/or output of all devices connected to the audio converter is selected/
activated.
Maintenance and cleaning
The product is maintenance-free, do not dismantle it. Have maintenance and repairs done by qualified
personnel only.
Unplug the product before cleaning.
Use a dry, soft and clean cloth for cleaning. Do not use any aggressive cleaning agents as these may lead
to discoloration. To prevent scratch marks, do not apply too much force on the surface during cleaning.
You can use a clean, long-haired brush and a vacuum cleaner to easily remove any dust.
Disposal
Do not dispose of the product with your household waste.
Please dispose of the device at the end of its service life in accordance with legal regulations;
e.g. return the device to a public collec-tion point.
Technical data
a) Audio converter
Operating voltage .........................................5 V/DC
Input...............................................................HDMI
Audio output ..................................................Analog, stereo audio signal, line level
Output level ...................................................1 Vpp ±10%
Supported sampling rate ...............................Up to 192 kHz
Ambient temperature .....................................0 °C to +40 °C
Ambient humidity ...........................................20% to 90% relative humidity (non-condensing)
Dimensions (W x H x D) ................................55 x 22.5 x 80.5 mm
Weight Approx. .............................................46 g
b) Power adapter
Operating voltage ..........................................100 - 240 V/AC, 50/60 Hz
Output ............................................................5 V/DC, 1 A
OPERATING INSTRUCTIONS
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.
