Caution:
• To avoid damaging the components, do not attempt to open or repair the product
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the product.
b) Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
Operating elements
Loop Out
HDMI In
IR In
IR Out
HDMI Out
CAT Out
IR In
IR Out
DC/12V
CAT
RS232
Link
Power
DC/12V
CAT
RS232
Link
Power
1
2
3
5
6
7 8
9
10
11
4
1 Loop Out
Connect to a local HDMI display device, such as a TV or projector.
2 HDMI In
Connect to an HDMI source device, such as a DVD player or PS4.
3 CAT Out
Connect to another receiver over a network cable (CAT.6, 6a, 7).
4 HDMI Out
Connect to a Remote HDMI display device, such as a TV or projector.
5 IR In
Connect to a wideband IR Receiver cable. The IR signal will be sent to the IR Out port of
another unit.
6 IR Out
Connect to a wideband IR Blaster cable. The IR signal will be sent to the IR Out port of
another extender.
7 DC/12 V
Plug the DC 12 V power supply into the extender and connect the adapter to an AC outlet.
The extender supports PoC, allowing either the sender or receiver to be powered by a 12
V power adapter.
8 Power LED
This lights up when the extender is powered on.
9 Link LED
This lights up when the Loop Out or HDMI Out connection has been established.
10 CAT
Connect a sender or receiver over a network cable (CAT.6, 6a, 7)
11 RS232
Pass through the RS232 signal.
Connection diagram
Output1
Output2
IR In
IR Out
HDMI
Out
IR In
IR Out
DC/12V
Power
CAT In
RS232
Link
CAT Out
TX
RX
HDMI Source
PS3,PC,STB,
Blu-ray DVD player etc
TV-4K@60 4:4:4
TV-4K@60 4:4:4
TV-4K@60 4:4:4
Cat. 6/6A/7
Cable
DC 12V
Power Input
Cat. 6/6A/7 Cable
PC or
Notebook
DC 12V
Power Input
PC or
laptop
Connect to
another Receiver
HDMI Out
HDMI
Out
HDMI In
IR
Receiver
IR
Blaster
IR
Receiver
IR
Blaster
Operating Instructions
HDMI extender (extension) via network cable 60 m
Item No. 2348253
Intended use
This HDMI extender transmits 4k@60 Hz or 1080p@60 Hz video over a single Cat6 Ethernet
cable up to a distance of 60 m. The extender supports Power over Cable (PoC), a bi-directional
wide-band IR extension and a Local Loop Output.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• Transmitter
• Receiver
• Power adapter
• 8 x screws
• 2x Phoenix connectors for RS232 cable
termination
• 4x L-shaped feet
• 2x IR detectors
• 2x IR receivers
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
•
Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
