This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1491433_V3_1016_02_IPL_m_en
Operating elements
5 V/DC 1 A
1
2
3
4
1 BNC output
2 Status LED
3 Power connection
4 HDMI input
Operation
• Turn off all devices to be connected and disconnect their mains plug from the wall
socket.
• Connect the HDMI cable of your player (e.g. BluRay player, game console, hard-
disk recorder) with the HDMI input (4).
When choosing a cable, please note that there are different types of HDMI
cables. In case of doubt, consult a professional for further information.
• Connect the SDI cable of your monitor or projector with the BNC output (1).
• Connect the round low-voltage plug of the power adapter with the power
connection (3).
• Connect the power plug to a common household power outlet. The status LED (2)
lights up.
• Connect the two connected devices with the mains voltage and start the playback.
Connection example
Troubleshooting
Problem
Solution
Status LED does not light up.
Check, whether the round low-voltage
plug of the power supply unit is
connected correctly with the power
connection.
Check, whether the mains plug is
connected correctly with the mains
power outlet.
Check, whether the mains power outlet
functions perfectly.
No image appears on the screen or
only an unclear image.
Make sure, that both connected
devices are switched on and connected
correctly with the converter.
Check if the connection cables are
defective and replace them if necessary.
Cleaning and care
• Before cleaning, disconnect the product from the connected devices and unplug it
from the power outlet.
• There are no components located inside the product you need to maintain. Never
open/dismantle the product.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other
chemical solutions since these can penetrate the housing or impair functionality.
•
Clean the product with a dry, fibre-free cloth.
• You can easily remove dust using a long-haired, soft and clean brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of
the environment.
Technical data
a) Converter
Input........................................ 1 x HDMI
Output ..................................... 1 x BNC (SDI / HD-SDI / 3G-SDI)
Supported resolutions ............. 480i, 576i, 720p (50 / 59.94 / 60 Hz)
1080i (50 / 59.94 / 60 Hz)
1080p (23,97 / 24 / 25 / 29,97 / 30 / 50 / 59.94 /
60 Hz)
Conversion ............................. 480i, 576i
→
SD-SDI(SMPTE 259M-C,
bit rate 270 Mbit/s)
720p, 1080i
→
HD-SDI (SMPTE 292M,
bit rate 1485 Gbit/s or 1485/1001 Gbit/s)
1080p
→
3G-SDI (SMPTE 424M/425M-AB,
bit rate 2970 Gbit/s and 2970/1001 Gbit/s)
SDI cable length ..................... max. 100 m (3G-SDI)
max. 200 m (HD-SDI)
max. 300 m (SD-SDI)
Operating conditions ............... 0 to +40 °C, 20 - 90 % RH
Storage conditions .................. -20 to +60 °C, 20 - 90 % RH
Dimensions (L x W x H) .......... 80 x 41 x 25 mm
Weight .................................... 150 g
b) Power adapter
Input voltage ........................... 100 – 240 V/AC, 50/60 Hz
Output voltage ........................ 5 V/DC
Output current ......................... 1 A
Power consumption ................ max. 5 W
