•
Never unplug the power adapter from the mains socket by pulling on the cable; always use
the grips on the plug.
•
When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
•
Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
•
For safety reasons, disconnect the power adapter from the mains socket during storms.
•
The power adapter is built according to protection class II.
•
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal
electric shock! Switch off the mains voltage to the socket containing the power adapter (switch
off at the corresponding circuit breaker or remove the safety fuse, and then switch off at
the corresponding RCD protective switch). You can then unplug the power adapter from the
mains socket. Dispose of the faulty power adapter in an environmentally friendly manner and
discontinue use. Replace it with a power adapter of the same design.
•
Never pour liquids over electrical devices or place objects filled with liquid next to the device.
If liquid or an object gets into the device, power down the respective mains socket (e.g. switch
off the circuit breaker), and then pull the mains plug from the mains socket. Discontinue use
and take the product to a specialist repair centre.
•
Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated may destroy the product. The mains adapter may also
cause a fatal electric shock! Allow the product to reach room temperature before connecting it
and putting it to use. This may take several hours.
•
Use overvoltage protection devices before the HDMI splitter to protect the device against
power surges.
•
Do not cover any of the ventilation grilles, otherwise the splitter may not be able to cool down
properly. Ensure that there is sufficient ventilation. Do not cover the housing!
Operating elements
HDMI IN
HDMI OUT 2
HDMI OUT 4
HDMI OUT 3
OPTICAL OUT
L/R OUT
DC 5V
HDMI OUT 1
4K 1080P
18G HDMI SPLITTER
1 x 4
POWER
IN
OUT 1
OUT 2
OUT 3
OUT 4
EDID
4K 1080P
SERVICE
OFF
ON
AUTO
COPY
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
10
1
DIP switch 4K/1080 p
2
EDID
switch
3
SERVICE
USB port
4 LED
OUT 4 (
for
HDMI OUT 4
output)
5
LED
OUT 3 (
for
HDMI OUT 3
output)
6
LED
OUT 2
(for
HDMI OUT 2
output)
7
LED
OUT 1 (
for
HDMI OUT 1
output)
8
IN
LED (for
HDMI IN
input)
9
POWER
LED
10 Ventilation openings (on both sides)
11
DC 5V
power-in socket
12
HDMI IN
input
13
L/R OUT
audio output
14
OPTICAL OUT
audio output
15
HDMI OUT 1
output
16
HDMI OUT 2
output
17
HDMI OUT 3
output
18
HDMI OUT 4
output
Setup and connection
•
Place the splitter on a flat, level surface.
•
Turn off the devices that you want to connect to the splitter (signal source/display device).
UHDTV
UHDTV
Amplifier
Speaker
DVD/Blu-ray
•
Use a suitable HDMI cable (not included) to connect the
HDMI IN
input (12) to the corresponding output
on an HDMI signal source, e.g. a Blu-ray™ player, DVD drive or games console.
•
Connect the four HDMI outputs (
HDMI OUT 1
(15) to
HDMI OUT 4
(18)) to your display devices (e.g. TV
or monitor) using HDMI cables (not included).
Operating instructions
1x4 HDMI Splitter 4K@ 60Hz with audio extractor
Item no. 1885498
Intended use
This product features one HDMI input and four HDMI outputs. Use the splitter to send an HDMI signal
from a source device (e.g. a Blu-Ray™ player or computer) to up to four display devices. The audio signal
can be decoupled from the HDMI signal and sent through the optical or analogue output. It supports video
resolutions up to 4K2K@60Hz (4:4:4) and HDCP. Display information (EDID) from the display device can
be read and processed/transferred. 4K video resolutions can be scaled down to 1080 p with the downscaler
function. Power is supplied by a separate power adapter.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bathroom)
must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause hazards
such as a short circuit, fire or electric shock. Read the operating instructions carefully and store them in a
safe place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names
included herein are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
•
HDMI splitter
•
Power adapter (5 V / 1 A)
•
Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This symbol indicates that this product is built according to protection class II. It is equipped with
reinforced or dual insulation between the mains circuit and the output voltage.
The product must only be installed and used in dry, indoor locations. It must not become damp
or wet, as this may cause a fatal electric shock!
Safety information
Read the operating instructions and safety information carefully. If you do not follow the
safety instructions and information on proper handling in these operating instructions,
we will assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
a) General information
•
The product is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
•
Never expose the product to mechanical stress.
•
If it is no longer possible to operate the product safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
•
Always observe the safety instructions and operating instructions of any other devices which
are connected to the product.
•
Consult a technician if you are not sure how to use or connect the product, or if you have
concerns about safety.
•
Maintenance, modifications and repairs must only be carried out by a technician or a specialist
repair centre.
•
If you have any questions that are not answered in these operating instructions, please
contact our technical customer service or other professionals.
b) Electrical safety
•
The mains outlet must be located near to the device and be easily accessible.
•
Only power the product using the power adapter provided.
•
Only connect the power adapter to a standard mains socket connected to the public grid.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
•
Never connect or disconnect power adapters if your hands are wet.
