Product overview
3
4
5
1
2
1
Output LED
2
Power LED
3 Power input
4
HDMI output sockets
5
HDMI input socket
Connection
Notes on HDMI input and output cables:
Always use high-quality HDMI cables.
The transmission quality depends on the quality and length of HDMI cables.
•
1080p: max. 10 m / 4K: max. 3 m
• Turn off all the devices that you want to connect to the HDMI splitter.
• Using suitable HDMI cables, connect the HDMI input socket
(5)
of the HDMI splitter to the HDMI output of
a playback device, for example, to the HDMI output of a satellite receiver, DVD player or game console.
• Connect output devices to the HDMI output sockets
(4)
(e.g. HDTV or HDMI display).
Operation
• Connect the round plug of the power adapter to the power input
(3)
. Insert the power adapter mains plug
into a suitable mains socket.
• The product turns on and the power LED
(2)
lights up.
• Turn on the playback device.
• Turn on the output devices (TV set, monitor). The corresponding output LEDs
(1)
light up.
Care and Cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions as these can damage the
housing or impair the product function.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste. At the end
of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.
Technical data
a) HDMI splitter
Input voltage .........................................
5 V/DC
Input current .........................................
2 A
Supported resolution ............................
480i to 1080p, 50/60 Hz /
1080p, 24/50/60 Hz /
VGA - UXGA, 4K 2K, 60 Hz
Bandwidth .............................................
600 MHz/6 Gbps per channel,
18 Gbps for all channels in total
Frequency .............................................
25 – 600 MHz
Colour depth .........................................
12 bit
Supported standards ............................
HDCP, Full 3D, LPCM 7.1 CH,
DTS-HD Master Audio
Operating conditions .............................
0 to +40 °C, 20 – 90 % RH (non-condensing)
Storage conditions ................................
-20 to +60 °C, 5 – 90 % RH (non-condensing)
Dimensions (L x W x H) ........................
203 x 58 x 16 mm
Weight ..................................................
259 g
b) Power adapter
Input voltage / current ...........................
100 – 240 V/AC, 50/60 Hz, 0.4 A
Output voltage / current ........................
5 V/DC, 2 A
Operating instructions
SP-HDS-280
1x8 4K HDMI Splitter
Item no. 2255589
Intended use
The product is designed for signal transmission
from one HDMI source to multiple output devices
(e.g. TV set, monitor, projector). The product
supports 3D, as well as video resolutions up to 4K.
Power is supplied via the power adapter included
with the product.
This product is intended for indoor use only.
Do not use it outdoors. Contact with moisture
(e.g. in bathrooms) must be avoided under all
circumstances.
For safety and approval purposes, you must not
rebuild and/or modify this product. Using the
product for purposes other than those described
above may damage the product. In addition,
improper use can cause hazards such as a short
circuit, fire or electric shock. Read the instructions
carefully and store them in a safe place. Only make
this product available to third parties together with
its operating instructions.
This product complies with statutory, national and
European regulations. All company and product
names are trademarks of their respective owners.
All rights reserved.
HDMI is a registered trademark of HDMI Licensing
L.L.C.
Package contents
• HDMI splitter
• Power adapter
• Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a
triangle indicates that there is a risk
to your health, e.g. due to an electric
shock.
The symbol with an exclamation
mark in a triangle is used to highlight
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on how to use
the product.
Safety instructions
Read the operating instructions
carefully and observe safety
instructions. If you do not follow the
safety instructions and information
on proper handling in these
operating instructions, we will
assume no liability for any resulting
personal injury or material damage.
Such cases will invalidate the
warranty/guarantee.
a) General
•
The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. It may become a dangerous toy for
children.
• Protect the product from extreme temperatures,
direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and
solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it
from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Handle the product carefully. Jolts, impacts or
a fall even from a low height may damage the
product.
• Always observe safety and operating
instructions of any other devices which are
connected to the product.
• Consult a technician if you are not sure how
to use or connect the product, or if you have
concerns about safety.
•
Maintenance, modifications and repairs must
be done by a technician or an authorised repair
centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Adapter
• The mains outlet must be located near to the
device and be easily accessible.
• Only power the product using the mains adapter
provided.
• Only connect the power adapter to a standard
mains socket connected to the public grid.
• Before plugging in the power adapter, check
whether the voltage stated on the power adapter
complies with the voltage of your electricity
supplier.
• Never connect or disconnect power adapters if
your hands are wet.
• Never unplug the mains adapter from the mains
socket by pulling on the cable; always use the
grips on the plug.
• For safety reasons, disconnect the power
adapter from the mains socket during storms.
• Do not touch the mains adapter if there are
any signs of damage, as this may cause a fatal
electric shock! Switch off the mains voltage
to the socket containing the power adapter
(switch off at the corresponding circuit breaker
or remove the safety fuse, and then switch off
at the corresponding RCD protective switch).
You can then unplug the mains adapter from
the mains socket. Dispose of the faulty mains
adapter in an environmentally friendly manner
and discontinue use. Replace it with a power
adapter of the same design.
c) Setup
• When setting up the product, make sure that the
cables are not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip
over or become entangled in them. This poses
a risk of injury.
d) Operation
• Never use the product immediately after it has
been brought from a cold room into a warm
one. The condensate generated can possibly
destroy the product. The mains adapter may
also generate a fatal electric shock! Allow the
product to reach room temperature before
connecting it and putting it to use. This may take
several hours.
• Never pour liquids over electrical devices
or place objects filled with liquid next to the
product. If liquid or an object does enter the
interior of the device, power down the respective
socket (e.g. switch off the circuit breaker), and
then remove the mains plug from the mains
socket. Discontinue use and take the product to
a specialist repair centre.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical state at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2255589_v1_0620_02_jh_m_en
