6
Subwoofer
Amplifier
Wire Nuts
Subwoofer
WIRING & SPEAKER INSTALLATION
Speaker & Burial Cable Connections
Combine and twist (clockwise) the red wires (see diagram) from the amp, speaker, and to the next
speaker in the series. Secure these three wires using the provided silicone-filled wire connectors;
Repeat procedure for Black wires.
NOTE
:
If necessary, cut some of the speaker cable from the speaker to a more manageable length.
WIRING FOR MULTIPLE SUBWOOFERS
Crown CDi 2|600 Amplifier
These Subwoofers are 8Ω and are optimized for use with the Crown CDi 2|600 amplifier.
Using more than 2 subwoofers on the same amplifier channel is not recommended. To wire a
second subwoofer, simply combine both of the subwoofer’s Red leads to the “+” input, and the
subwoofer’s Black leads to the “-“ input of your wiring as shown in the diagram below.
Other Amplifiers
These Subwoofers are 8Ω. Please refer to the amplifiers owner’s manual for wiring instructions
and minimum impedance load specifications.
