22
AFTER SALES SUPPORT
0345 605 2070
6. Squeeze throttle to start cutting
Squeeze throttle 1,then press 2 to provide
fuel to engine and use for intended task.
7. Cutting work
Control U handle with two hands, Keep a
firm grip with both hands while operate.
Machine should be held at a comfortable
position about hip height.
Keep your body and feet in safety distance
to cutting head.
Squeezing the throttle lever to full speed
before cutting. The cutting blade should run
parallel to the ground surface.
Never cut other things like stone,etc,it will
damage blade seriously. WARNING: Always
wear eye, hearing, hand, foot and body
protection to reduce the risk of injury when
operating this unit.
WARNING:
To prevent serious personal
injury, avoid arm contact with the engine
while operating the unit. The engine may be
extremely hot.
• Stand in the operating position stand up
straight. Do not bend over.
• Keep feet apart and firmly planted.
• Hold the shaft grip with the right hand.
Keep the right arm slightly bent.
• Hold the handle with the left hand. Keep
the left arm straight.
• Hold the unit at waist level.
• Position the cutting head a few inches
OPERATE
1
2
