AFTER SALES SUPPORT
0345 605 2070
27
housing, then push the cover until it locks
securely in the place.NOTE: Make sure the
filter is seated properly inside the cover.
Installing the filter incorrectly will allow dirt to
enter the engine, causing rapid engine wear.
If the nylon filter element is lost, it should be
reinstalled by contacting customer support.
MAINTENAINCE
5. Clean cutting blade
6. Inspect the Spark Plug
7. Storage
Cutting blade should be cleaned with cloth
and brush,remove the clay or something,
k e e p b l a d e c l e a n a n d s t o re i n d r y
environment.
Pull out the spark plug cap and clean the
dust in the spark plug area.
Screw out the spark plug with the provided
socket wrench.Check the ceramic isolation.
Clean the electrodes (metal tip) to refresh
the surfaces.
• Never store a fueled unit where fumes may
reach an open flame or spark.
• Allow the engine to cool before storing.
• Lock up the unit to prevent unauthorized
use or damage.
• Store the unit in a dry, well-ventilated area.
• Store the unit out of the reach of children.
0.6-0.8 mm
