background image

  

   

AFTER SALES SUPPORT

 

0345 605 2070

       

31

       

WARRANTY

If your device develops a fault, please don’t hesitate to contact our customer service 
department on 0345 605 2070, we can solve 80% of problems via the phone.

1. These warranty terms cover additional warranty rights and do not affect your 

statutory warranty rights. All our products are covered by a 3 year manufacturer 
warranty.

2. Claims must be accompanied by proof of purchase. This must be in the form 

of a sales receipt or bank statement and must show that the product has been 
purchased within the warranty period as described under point 1, from the retailer 
that it was originally bought from. Please keep your receipt safe or staple it to the 
back of this manual for future reference.

3. Our warranty covers problems caused by material or manufacturing defects, and 

will result in the repair of these defects or replacement of the device with a like for 
like or similar article.

4. Our devices have not been designed for commercial, trade or industrial 

applications, any signs of use of the equipment in these application or equivalent 
activities, invalidates the warranty.

5. The following are also excluded from our warranty: 

A. Faults due to accidents, customer misuse or unauthorized repairs 
B. Consumable Parts such as cutting blade, handles, knobs, and other 

accessories that are compatible with the product. 

C. Failure due to lack of routine maintenance. 
D. Failure as a result of not using the equipment in accordance with the manual 

and safety instructions 

Warranty claims should be submitted before the end of the warranty period, see point 
1, but a paid service exists for repairs commissioned after this period. The original 
warranty period remains applicable to the device even if repairs are carried out or 
parts are replaced. In such cases, the work performed or parts fitted will not result in 
an extension of the warranty period, and no new warranty will become active for the 
work performed or parts fitted.

If you have any problems or questions concerning your garden power tool, please 
contact our after sales service at 0345 605 2070.
This device may be re-conditioned, like for like or upgraded replacement.

Summary of Contents for S3125PT

































Reviews: