Spearhead
Multicut
460
16
Servicing & Maintenance
Daily
Grease all points, including rear axle pivot points (Fig. 9a), axle hinge (Fig.
9c), wheel arms (Fig. 9b), and front draw bar pivot (Fig. 9f)
Check bolts are tight on all gearboxes.
Check condition of blades and blade bushes; ensure all retaining bolts are
fully tight.
Check wheel nuts are tight.
Check tyre pressures
– 40 P.S.I.
Check gearbox oil, replenish with EP90 gear oil as necessary to the correct
level line on the dipsticks, provided with each gearbox.
Fig. 9 Greasing points
A Rear axle pivot points; grease points 7 off
B Wheel arm grease points 4 off
C Rear axle hinge joint grease points 2 off
D Height adjustment grease points 1 off
E Drive shafts c/w slip clutch 2 off
F Front drawbar grease points 2 off
G Wing rams 2 off
H Wheel bearings 8 off
I Telescopic shafts 2 off
Blade rotation
CLOCKWISE
Blade rotation
ANTI CLOCKWISE