8999146EN: v1 26/02/2020
37
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
WARNING!
Great care must be taken when attempting to clear debris from the blade and/or belt area
of the machine; sharp components and numerous pinch risk points exist in these locations. Safety
gloves and safety eyewear should be worn and wherever possible the use of a suitable tool should be
used to remove any debris to ensure hands and fingers are kept clear of any risk areas.
Ensure you wear all Personal Protection Equipment (PPE) as stated in Section 4.1.1
Remove the blade safeguard following the guidance in Section 3.5.1 and turn the reach arm into work
position.
The machine is designed to work vertically but can be angled to work at a maximum angle of 45°. The
position should be considered in order to mak
e sure debris doesn’t hit the tractor along with preventing
the blades from distorting and breaking. When cutting hedges always start from the bottom vertically.
Figure 4.5
When working on trees ensure that the tractor is of suitable distance from the tree to ensure the safety
of you and the tractor from falling, cut branches.
