8999146EN: v1 26/02/2020
19
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.11 Working In Public Places
When working in public places such as roadsides, consideration should be paid to others in the vicinity. Stop the
machine immediately when pedestrians, cyclists and horse riders etc. pass. Restart only when they are at a
distance that causes no risk to their safety.
DANGER!
Always inspect the work area thoroughly before starting to note obstacles and remove wire,
bottles, cans and other debris.
DANGER!
Never use a machine that is poorly maintained.
DANGER!
Use clear suitably sized warning signs to alert others to the nature of the machine working
within that area. Signs should be placed at both ends of the work site. (It is recommended that
signs used are of a size and type specified by the Department of Transport and positioned in
accordance with their, and the Local Highways Authority, guidelines).
DANGER!
Never start or continue to work a machine if people are nearby or approaching - Stop and
wait until they are at a safe distance before continuing. WARNING: Some cutting heads may
continue to ‘freewheel’ for up to 40 seconds or more after being stopped.
DANGER!
Never allow children near to, or play on, a tractor or machine under any circumstances.
DANGER!
Never use a machine on which the hydraulic system shows signs of wear or damage.
DANGER!
Always clear up all debris left at the work area, it may cause hazard to others.
DANGER!
Never allow any bystanders within a 90 metre radius of the machine when operating. Stop
the machine immediately if this safety area is entered and do not restart the machine until the
bystanders have escaped the area sufficiently.
2.12 Safe Maintenance
WARNING!
It is mandatory to switch the combustion engine off and disengage PTO, lower the
machine, ensure that the machine has completely stopped, remove the ignition key from the
dashboard of the tractor and engage the parking brake before leaving the driver’s seat and
engaging in maintenance operations.
IMPORTANT:
Maintenance on the machine should be performed by only skilled and specialized
personnel, in strict compliance with the instructions in this manual, and any worn or damaged
parts should be replaced.
IMPORTANT:
Always use genuine Spearhead parts when carrying out repairs and maintenance with
thoughts to longevity and reliability of the machine and personnel safety.
IMPORTANT:
Store the machine in a safe place which is protected from the elements, when the work
is completed to ensure its wellbeing and protection from damage to components.
CAUTION!
Relieve hydraulic pressure before disconnecting lines or working on the machine. This can
be done by pushing and pulling/pushing the selected tractor lever/button. Only once this has
been completed can the hydraulic hoses be removed from the machine.
CAUTION!
When working with/checking the hydraulic system on the reach arm or machine always
wear safety glasses and impenetrable gloves. Use paper or cardboard to search for leaks and
not hands or any other body parts.
