8999146EN: v1 26/02/2020
22
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 2.7
2.15 Safety Decals
Safety decals are located in various points on the machine; see Figures 2.8 and 2.9. They can be identified in
yellow with the upper panel depicting the hazard, and the lower panel indicating means of avoidance or
precautions to be taken. These decals have no text. It is essential that all operators and personnel associated
with the machine fully understand their meanings.
Safety decals should be kept clean and legible at all times. Any safety decals which are found to be missing or
illegible should be replaced.
Figure 2.8
Figure 2.9
1
Stop engine and remove key before performing maintenance or repair work.
2
Danger: keep clear of overhead power lines. Where doubt exists contact your local power company
for advice.
3
Danger: keep clear of rotating blades.
4
Pressurised oil, beware of leaks. Consult technical manual for service procedures.
5
Danger: flying objects. Keep a safe distance from the machine when the engine is running.
6
Check tightness of bolts every 8 hours
– retighten if required.
