11
What you’ll need for this page:
If you are not installing the optional Seat and Back Liners, skip to
Page 13.
Seat Liner Cushion
16. First, remove the
factory-installed
3-Point
Harness
from
Seat Liner
cushion.
Next, ensure that your
Seat
Liner Attachment Strap
is at least 52” long to be
compatible with the
Out &
About Seat.
19. Feed
Seat Liner
Attachment Strap
behind
Base Fabric Backrest
Section
and through the
lowest
Base Fabric
Strap
Guide Hole on the opposite
side. Buckle and tighten.
18. Thread
Seat Liner Attachment Strap
through the lowest
Base Fabric
Strap Guide
Hole
shown here.
Note: Position the
Seat Liner
Attachment Strap
buckle as
shown here. Do not let the
plastic buckle contact the Chair
to prevent possible scratches.
Seat Liner Attachment Strap
17. Feed
Crotch
Strap
and
Waist Straps
through the
respective
cutouts in the
Seat Liner
Cushion
.
Optional Seat Liner Cushion
Assembly