2
1.2
Connections
To quickly get started, connect the following to your recorder in the following order, please refer to Figure 1-2 (N8NXP
shown for reference).
1.
Connect IP cameras to the PoE ports of the recorder.
2.
Connect a monitor to the recorder via VGA or HDMI cable (not included).
3.
Connect the included optical mouse into any USB port of the recorder.
4.
Connect the power cord to the recorder and plug into a 120VAC 50/60Hz outlet.
5.
Connect recorder to network (optional)
6.
Turn on power switch and allow recorder to boot up.
Figure 1-2
