FAQ
NVR User Manual
70
cannot access the NVR remotely.
Q10.
ActiveX control cannot be downloaded. How can I do?
a.
IE browser blocks ActiveX control. Please do setup as per the steps mentioned below.
①
Open IE browser. Click
Internet Options.
②
Select Security
Custom Level. Refer to Fig 10-1.
③
Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 10-2.
④
Then click “OK” to finish setup.
b.
Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings.
Fig 10-1 Fig 10-2
Q11.
How to play the backup file?
a.
Record backed up by NVR: insert the USB device in which the record backup files is saved to the USB interface of the PC and then open the USB
device path. The record can be backed up in the private format and AVI format by NVR.
If you select the private format when backing up record by NVR, an RPAS (Recording Player Application Software) compression package will be
backed up to the USB device automatically along with the record data. Uncompress the “RPAS.zip” and then click “RPAS.exe” to set up RPAS. After
the setup is completed, open RPAS player and then click “Open Folder” button in the middle of the interface to select the record data. Refer to Fig
11-1.
Select camera in the resource tree on the left side of the interface to play the camera record. Click
on the tool bar under the camera image to
enable audio. Refer to Fig 11-2.
If you select the AVI format when backing up record by NVR, the record backup data can be played by the video player which supports this
Note: The record will not have audio output if you disable the audio when recording by NVR. Please
see 7.1.1 Mode Configuration and 7.2 Encode Parameters Setting for details.
