1.2
Dimensions
Note:
Please refer to the following figure for dimension information. The unit is mm. See
1.3
Alarm Setup
Alarm input, output description:
Step 1 Connect alarm input device to the alarm input of
Step 2 Connect alarm output device to the alarm output of
collector circuit which connects 10K resistor to 3.3V externally.
Step 3 Open the web viewer and set
alarm signal, the alarm input device will generate high and low level
corresponding type to NO or NC
Step 4 Set the alarm output. The alarm output is for the alarm output port of the device.
Please refer to the following figure for dimension information. The unit is mm. See Figure 1
Figure 1-2
Figure1-3
Step 1 Connect alarm input device to the alarm input of the I/O cable.
Step 2 Connect alarm output device to the alarm output of the I/O cable. Alarm output is
which connects 10K resistor to 3.3V externally.
set the alarm input and output correspondingly. When
alarm input device will generate high and low level signals. Set the
corresponding type to NO or NC .
Step 4 Set the alarm output. The alarm output is for the alarm output port of the device.
1- 2.
larm output is an open
alarm input and output correspondingly. When there is an
the
Step 4 Set the alarm output. The alarm output is for the alarm output port of the device.
