Advanced Features
Implementing nTier Deduplication
52
• None – No messages will be sent.
• Critical (severity level 1) - Only critical errors that stop the system from
operating properly will be sent.
• Error (severity level 2) – Errors (failure such as a resource is not available or
an operation has failed) and critical errors will be sent.
• Warning (severity level 3) – Warnings (something occurred that may require
maintenance or corrective action), errors, and critical errors will be sent.
• Informational (severity level 4) – Informational messages, errors, warnings,
and critical error messages will be sent.
5. Click
Add
to enter the name of your SNMP server and a valid SNMP community.
6. To verify that SNMP traps are set up properly, set the level to
Informational
and
then do anything that causes an entry to be added to the event log (such as
logging into the VTL console or creating a new virtual tape library).
You should see an SNMP trap for the event.
