FOCUS 35 TOTAL STATION USER GUIDE
2
Contact details
Spectra Precision
10368 Westmoor Drive
Westminster, CO 80021, USA
U.S.A.+1-720-587-4700 Phone
888-477-7516 (Toll free in USA)
Copyright and Trademarks
© 2005-2017, Trimble Inc. All rights reserved. Spectra Precision is a
Division of Trimble Inc. Spectra Precision and the Spectra Precision
logo are trademarks of Trimble Inc. or its subsidiaries. GeoLock,
LockNGo, Ranger, T41, and StepDrive are unregistered trademark of
Trimble Inc. EPOCH and FOCUS are trademarks of Spectra Precision.
Survey Pro is a trademark of Spectra Precision. Microsoft, ActiveSync,
Windows, Windows Mobile, and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any use of such marks by Trimble
Inc. is under license. All other trademarks are the property of their
respective owners.
Release Notice
This is the June 2017 release version 1.05 of the Spectra Precision
FOCUS 35 Total Station User Guide, P/N 77701035. It applies to the
Spectra Precision FOCUS 35 total station.
The following limited warranties give you specific legal rights. You may
have others, which vary from state/jurisdiction to state/jurisdiction.
Product Warranty Information
For applicable product warranty information, please refer to the
Warranty Card included with this Spectra Precision product, or consult
your Spectra Precision dealer.
Updates and new products
To obtain information regarding updates and new products, contact
your Spectra Precision distributor or visit the Spectra Precision website
at
www.spectraprecision.com
.
Notices
A
USTRALIA
AND
N
EW
Z
EALAND
This product complies with the regulatory requirements
of the Australian Communications and Media Authority
(ACMA) EMC framework, thus satisfying the
requirements for RCM-Marking and sale within Australia
and New Zealand.
C
ANADA
This Class A digital apparatus complies with Canadian ICES-003. This
digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appareils
numériques de Classe A prescrites dans le règlement sur le
brouillage radioélectrique édicté par le Ministère des
Communications du Canada.
This device has been designed to operate with an antenna having a
maximum gain of 2.0 dBi. Antenna having a higher gain is strictly
prohibited per regulations of Industry Canada. The required antenna
impedance is 50 ohms. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication. Operation is subject to the
following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Devices marked with Part Numbers 78200035 (78211035), 78201035
(78311035) and 78202035 (78511035) contain radio module with
IC: 4492A-2410G.
The device contains a Bluetooth radio module with IC: 9102A-TJFBM.
E
UROPE
This product has been tested and found to comply with
relevant requirements pursuant to European Council
directives, thereby satisfying the requirements for CE
marking and sale within the European Economic Area
(EEA).
Applicable directives:
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
The compliance to the applicable requirements is detailed in the
official Declaration of Conformity document, which is filed at Spectra
Precision.
For product recycling instructions and more information, please go to
www.spectraprecision.com/ev.shtml
.
Recycling in Europe: To recycle Spectra Precision WEEE
(Waste Electrical and Electronic Equipment, products
that run on electrical power.), Call +31 497 53 24 30, and
ask for the „WEEE Associate“. Or, mail a request for
recycling instructions to:
Spectra Precision Europe BV
c/o Menlo Worldwide Logistics
Meerheide 45
5521 DZ Eersel, NL
USA
Class A Statement – Notice to Users. This equipment has been tested
and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a
commercial installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the
manufacturer or registrant of this equipment can void your authority
to operate this equipment under Federal Communications Commission
rules
The antenna used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or
transmitter:
Devices marked with Part Numbers 78200035 (78211035), 78201035
(78311035) and 78202035 (78511035) contain radio module with FCC
ID: HSW- 2410G.
The device contains a Bluetooth radio module with
FCC ID: YK5-TJFBM.
.
T
AIWAN
Battery Recycling Requirements
The product contains a removable Lithium-ion battery.
Taiwanese regulations require that waste batteries are
recycled.