FOCUS 35 TOTAL STATION USER GUIDE
3
Important Information
Before using the Spectra Precision® FOCUS® 35 total station, make sure that you understand this
user guide, as well as all equipment and job site safety requirements.
Safety Information
•
Instruments and original accessories from Spectra Precision must only be used for the intended
purpose.
•
Operate the instrument only in compliance with the operating conditions specified. Do not point
the telescope directly at the sun.
•
Do not use the instrument and accessories in rooms with danger of explosion.
•
Protect operator and instrument sufficiently at the site of measurement (e.g., construction site,
roads, etc.). Observe any relevant national regulations and the Road Traffic Act.
•
Do not carry out surveying work in a thunderstorm to avoid being struck by lightning.
•
Do not modify the instrument.
•
Do not use the instrument if there are any visible damages.
•
Only authorized Spectra Precision service centers have permission to repair this product.
Laser Safety
This equipment has been tested and found to comply with IEC 60825-1:2014 and IEC 60825-1:2007
and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July26,
2007.
C
WARNING –
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous LED or laser radiation exposure. As with any bright
light source, such as the sun, electric welding arcs or arc lamps, common sense applies.
DO NOT look into the laser aperture when the laser is on. For further information regarding
laser safe use of laser, refer to IEC standard 60825-1:2014.
Note –
For security reasons the Spectra Precision
®
FOCUS
®
35 user guide describes the warnings and
regulations of the IEC 60825-1:2014 and the warnings and recommendations of the German
industrial regulation BGV B2 (updated print version April 2007).
In accordance with this German regulation, a responsible person must be identified for laser safety.
All absolute vital power to fulfill this task has to be transferred to this person.
Please ensure that you are aware of any national laws and regulations applicable in the country of
operation, concerning laser safety precautions and any other occupational safety and health issues
that may be encountered. All national laws and regulations take precedence over foreign or
international standards.
