FOCUS 35 TOTAL STATION USER GUIDE
2 –
Inspection, Care, and Maintenance
17
Applying a Screen Protector for the Face 1 Screen (if fitted)
Before applying a screen protector please read the screen protector installation guide/information
provided inside the screen protector package.
Use the screen protectors (ULTRA-Clear or ANTI-Glare) included in the instrument case to keep the
touchscreen clean and protected.
To apply a screen protector:
•
Clean the display thoroughly with the provided dust-free cloth.
•
Peel the backing from the screen protector.
•
Align the edge, and then drop the remainder onto the display.
•
Use the provided installation card, if necessary, to squeeze the air from underneath the screen
protector.
Ultra-Clear: Screen Protection with 99% visual transparency.
ANTI-Glare: Screen Protection with a perfect blend of anti-glare and optical clarity.
Removing Moisture
If the instrument has been used in damp weather, take the instrument indoors and remove the
instrument from the instrument case. Leave the instrument to dry naturally. If condensation forms
on the lenses, allow the moisture to evaporate naturally. Leave the carrying case open until all
moisture has evaporated.
Transporting the Instrument
Always transport the instrument in a locked instrument case. For longer trips, transport the
instrument in the instrument case and inside the original shipping container.
Servicing
Note –
There are no user-serviceable parts on the Spectra Precision FOCUS 35 Total Station.
Spectra Precision recommends that you take the instrument to an authorized service center for
service and calibration once a year. This is to guarantee that the specified accuracies are maintained.
When you send the instrument to a service center, clearly write the name of the sender and the
receiver on the instrument case. If repairs are required, enclose a note in the instrument case. The
note should clearly describe any fault or symptoms, and indicate that servicing is required.
