FOCUS 35 TOTAL STATION USER GUIDE
4 –
Setup
59
USB Interface
B
Tip –
Please make sure that the default setting
USB Interface
for Customer is
Always Off
.
B
Tip –
If the FOCUS 35 total station needs a
firmware upgrade, the USB interface setting
must be set to
Always On
to complete the
firmware upgrade.
Service Menu - System diagnose
Press
N
and
O
to scroll to
System diagnose
and
then press
P
.
Service Menu - Run system diag.
Press
N
and
O
to scroll to
Run system diag.
and
then press
P
.
B
Tip –
Show system state
shows straightaway the
most recently obtained diagnose results
.
System diagnose
The diagnose program checks all instrument
functions. During the diagnosis process, you may be
prompted to turn the instrument knobs and be
requested to aim to a prism. At the end the program
shows the results and offers the possibility to store it.
Screen
Actions and Comments
Exit
Always On
USB Interface
Temporary On
Always Off
System diagnose
USB Interface
Service Menu
Exit
Ext. EDM Frequency
Run system diag.
Service Menu
Exit
Show system state
Run system diag.
Check......
Please wait
Exit
