X-Y-Z-grade entering
Step and Go mode
Quickly press and release button
2
starts the
grade entering mode
.
Both grade values will be shown.
Press/release button
1
grade reverse Y
Press/release button
2
grade reverse X
Press/release button
3
return to the standard display.
Quickly press and release button
4 to
confirm the selected grade
value and return to the standard display
Press and hold
button 6 or 7 (left/right) to
change X- axis grade value
after the comma; press and hold
buttons 6 + 7 simultaneously
starts
X-axis quick change mode
where the grade value in front of the comma will be
set to 0% and
then starts changing
in 1%
increments.
Press and hold
button 5 or 8 (up/down)
for changing Y/Z -axis
grade value;
press and hold
buttons 5
+ 8 simultaneously
starts
Y/Z - axis quick change mode
where the grade value in front of the comma
will be
set to 0% and
then starts changing
in 1% increments
Note:
When the grade value for either axis reaches its highest amount, the grade value switches to the
lowest value for that axis. For example, the value switches from +25% to -25%.
The laser will self-level to the required grade position after
confirming the grade change
with
button 4
.
Note:
The bubble symbols at the
laser’s LCD will flash until the laser has been
self-leveled to the requested grade position.
Standard Display
Standard Features