background image

APPENDIX 

76

 

IB965 User’s Manual

 

 
 
unsigned char Get_F81866_Reg(unsigned char REG) 

 

unsigned char Result; 

 

Unlock_F81866(); 

 

outportb(F81866_INDEX_PORT, REG); 

 

Result = inportb(F81866_DATA_PORT); 

 

Lock_F81866(); 

 

return Result; 


//--------------------------------------------------------------------------- 
 
 
 
 
 
 
 
//--------------------------------------------------------------------------- 
//                                                                           
// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY     
// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE       
// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR     
// PURPOSE.                                                                  
//                                                                           
//--------------------------------------------------------------------------- 
#ifndef __F81866_H 
#define __F81866_H   

 

 

//--------------------------------------------------------------------------- 
#define 

F81866_INDEX_PORT 

 

(F81866_BASE) 

#define 

F81866_DATA_PORT 

 

(F8181) 

//--------------------------------------------------------------------------- 
#define 

F81866_REG_LD 

 

 

0x07 

//--------------------------------------------------------------------------- 
#define F81866_UNLOCK   

 

0x87 

#define 

F81866_LOCK 

 

 

 

0xAA 

//--------------------------------------------------------------------------- 
unsigned int Init_F81866(void); 
void Set_F81866_LD( unsigned char); 
void Set_F81866_Reg( unsigned char, unsigned char); 
unsigned char Get_F81866_Reg( unsigned char); 
//--------------------------------------------------------------------------- 
#endif  //__F81866_H 
 
 
 
 
 

 

Summary of Contents for IB965F

















































































Reviews: