background image

TRIBUTION, INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF MERCHANTABILI-
TY AND FITNESS FOR A PARTICULAR PURPOSE, 
TITLE, AND NONINFRINGEMENT. THE STATED EX-
PRESS WARRANTIES ARE IN LIEU OF ALL OBLI-
GATIONS OR LIABILITIES ON THE PART OF 
SPECTRA PRECISION ARISING OUT OF, OR IN 
CONNECTION WITH, ANY PRODUCT. BECAUSE 
SOME STATES AND JURISDICTIONS DO NOT AL-
LOW LIMITATIONS ON DURATION OR THE EXCLU-
SION OF AN IMPLIED WARRANTY, THE ABOVE 
LIMITATION MAY NOT APPLY OR FULLY APPLY TO 
YOU.

LIMITATION OF LIABILITY

 - SPECTRA PRECI-

SION’S ENTIRE LIABILITY UNDER ANY PROVI-
SION HEREIN SHALL BE LIMITED TO THE 
AMOUNT PAID BY YOU FOR THE PRODUCT. TO 
THE MAXIMUM EXTENT PERMITTED BY APPLICA-
BLE LAW, IN NO EVENT SHALL SPECTRA PRECI-
SION OR ITS SUPPLIERS BE LIABLE FOR ANY 
INDIRECT, SPECIAL, INCIDENTAL, OR CONSE-
QUENTIAL DAMAGE WHATSOEVER UNDER ANY 
CIRCUMSTANCE OR LEGAL THEORY RELATING IN 
ANYWAY TO THE PRODUCTS, SOFTWARE, AND AC-
COMPANYING DOCUMENTATION AND MATERIALS, 
(INCLUDING, WITHOUT LIMITATION, DAMAGES 
FOR LOSS OF BUSINESS PROFITS, BUSINESS IN-
TERRUPTION, LOSS OF DATA, OR ANY OTHER PE-
CUNIARY LOSS), REGARDLESS OF WHETHER 
SPECTRA PRECISION HAS BEEN ADVISED OF THE 
POSSIBILITY OF ANY SUCH LOSS AND REGARD-
LESS OF THE COURSE OF DEALING WHICH DE-
VELOPS OR HAS DEVELOPED BETWEEN YOU AND 
SPECTRA PRECISION. BECAUSE SOME STATES 
AND JURISDICTIONS DO NOT ALLOW THE EXCLU-
SION OR LIMITATION OF LIABILITY FOR CONSE-
QUENTIAL OR INCIDENTAL DAMAGES, THE 
ABOVE LIMITATION MAY NOT APPLY OR FULLY AP-
PLY TO YOU.

PLEASE NOTE: THE ABOVE SPECTRA PRECISION 
WARRANTY PROVISIONS WILL NOT APPLY TO 
PRODUCTS PURCHASED IN THOSE JURISDIC-
TIONS (E.G., MEMBER STATES OF THE EUROPEAN 
ECONOMIC AREA) IN WHICH PRODUCT WARRAN-
TIES ARE THE RESPONSBILITY OF THE LOCAL 
SPECTRA PRECISION AUTHORIZED DISTRIBU-
TION PARTNER FROM WHOM THE PRODUCTS ARE 
ACQUIRED. IN SUCH A CASE, PLEASE CONTACT 
YOUR LOCAL SPECTRA PRECISION AUTHORIZED 
DISTRIBUTION PARTNER FOR APPLICABLE WAR-
RANTY INFORMATION.

OFFICIAL LANGUAGE

 - THE OFFICIAL LANGUAGE 

OF THESE TERMS AND CONDITIONS IS ENGLISH. 
IN THE EVENT OF A CONFLICT BETWEEN ENG-
LISH AND OTHER LANGUAGE VERSIONS, THE 
ENGLISH LANGUAGE SHALL CONTROL.

REGISTRATION

 - To receive information regarding 

updates and new products, please contact your local 
Spectra Precision Authorized Distribution Partner or 
visit the Spectra Precision website at 

www.spectra-

precision.com/register

. Upon registration you may 

select the newsletter, upgrade, or new product infor-
mation you desire.

CE

a. Caution:

CAUTION: Danger of explosion if battery is in-
correctly replaced. Replace only with the same 
or equivalent type recommended by the manu-
facturer

Dispose of used batteries according to the man-
ufacturer instructions.

 

b. Please make sure the temperature for adapter will 
not be higher than 40 ˚C. 

CE SAR Compliance

This device meets the EU requirements (1999/519/
EC) on the limitation of exposure of the general pub-
lic to electromagnetic fields by way of health protec-
tion.

The limits are part of extensive recommendations for 
the protection of the general public. These recom-
mendations have been developed and checked by in-
dependent scientific organizations through regular 
and thorough evaluations of scientific studies. The 
unit of measurement for the European Council's rec-
ommended limit for mobile devices is the "Specific 
Absorption Rate" (SAR), and the SAR limit is 2.0 W/ 
kg averaged over 10 gram of body tissue. It meets the 
requirements of the International Commission on 
Non-Ionizing Radiation Protection (ICNIRP).

For body worn operation, this device has been tested 
and meets the ICNIRP exposure guidelines and the 
European Standard EN 62311 and EN 62209-2, for 
use with dedicated accessories. Use of other acces-
sories which contain metals may not ensure compli-
ance with ICNIRP exposure guidelines.

EU Conformance

The following CE compliance information is applica-
ble to this device that carry the following CE mark:

FCC

FCC Regulations:

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, 
and (2) this device must accept any interference re-
ceived, including interference that may cause unde-
sired operation.

This device has been tested and found to comply 
with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against 
harmful interference in a residential installation. 
This equipment generates, uses and can radiate ra-
dio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, 
there is no guarantee that interference will not occur 
in a particular installation if this equipment does 
cause harmful interference to radio or television re-
ception, which can be determined by turning the 
equipment off and on. The user is encouraged to try 
to correct the interference by one or more of the fol-
lowing measures:

Summary of Contents for MobileMapper 120















































Reviews: