English
1
First-Time Use
Unpacking
Open the receiver box and unpack the following items:
•
Receiver
•
SD card containing required applications (GNSS Toolbox,
GNSS Service, etc.)
•
Battery
•
Docking station
•
Universal AC adapter
•
USB cable
Inserting the
Battery Into the
Receiver
Follow the instructions below:
•
Turn over the receiver and rotate the finger screw counter-
clockwise a quarter turn and pull the trap door open.
•
Insert the battery as shown. The label must be outwards
and the right way up.
•
Put the trap door back into place by first inserting the two
clips located at the top of the trap door.
•
Then push the door against the case and rotate the finger
screw clockwise by one-quarter turn for a secure and
sealed closure.
