Spectra
GmbH
&
Co.
KG
sales@spectra.de
User
Manual
Spectra
PowerTwin
Monitor
+
sunreadable Displays
30
Chapter 3: System Setup
3.1 Connecting with PowerTwin Display Module
In order to prevent electric shock or system damage, before removing
the chassis cover, please turn off power and disconnect the unit from the
power source.
W
ARNING
1. Locate the module connector slot and loosen 1 screw.
2. Turn over the module and loose 2 screws at the back of the connector cover.
The photos shows the male connector (on monitor module) and female connector (on
display module)