11
may harbour bacteria that can
contaminate breast milk. Try not to
touch the inside of any parts that
will come into contact with breast
milk.
6.
Once dry, store parts in a clean,
closed container (i.e. snaplock bag
or clean plastic tub with a lid).
7.
Never immerse your pump motor in
water. Wipe clean with a damp
cloth as needed.
8.
Never wash or sterilise the tubing. When used correctly, the
backflow protector stops milk from entering the tubing. If milk should
somehow enter the tubing, we recommend replacing the tubing. If
tubing should become wet, make sure it is completely dry before
pumping as not to damage the motor.
9.
The backflow protector does not need to be washed after each use.
If you notice moisture in the backflow protector, disassemble and
wash each of the three parts separately. Allow to air dry completely
before reassembly.
Cleaning & Care Tips
Valves that are difficult to remove from the shield to wash, or slip off the
shield during pumping, may need replacing, or may have a residue of fatty
milk build-up. This can be helped by cleaning the shield and valves
thoroughly, and washing them in a mix of 1 part vinegar 3 parts hot water to
release the fatty residue. (This can be the case with bottles coming loose
from shields too, and same solution).
Summary of Contents for S1
Page 1: ...1 Spectra S1 ...
Page 9: ...9 ...
