1/11 IO-AI8
I / O E x p a n s i o n M o d u l e
Screw-Mounting
The figure below is not drawn to scale. It may be used as a guide for screw-mounting the module.
Mounting screw type: either M3 or NC6-32.
4mm
5.8mm
(0.228")
85
mm
(3
.3
46"
)
80mm
(3.15")
68.4mm
(2.693")
93
mm
(3
.6
6"
)
4mm (x2)
(0.16")
(0.16")
Connecting Expansion Modules
An adapter provides the interface between the OPLC and an expansion module. To connect the I/O module to
the adapter or to another module:
Push the module-to-module connector into the port located on the right side of the device.
Note that there is a protective cap provided with the adapter. This cap covers the port of the
final
I/O module in the system.
To avoid damaging the system, do not connect or disconnect the device when the
power is on.
1
2
Component identification
1 Module-to-module
connector
2 Protective
cap
Spectra GmbH & Co. KG
vertrieb@spectra.de
Spectra (Schweiz) AG
info@spectra.ch
