ETH0, using the default static IP address (see step 6),
ETH1-ETH5, using a DHCP network (see step 7),
"Setting Up an IP Address via the Serial Port" on
).
6.
The unit is shipped with one
static IP address: ETH0 = 192.168.1.1
. To com-
municate with the Web UI using this address, connect a PC with a configured
LAN port via Ethernet cable to the VelaSync server using ETH0.
7.
To connect a device using DHCP, connect to an Ethernet port without a static IP
address (any Ethernet port except ETH0). Find the unit on your network by con-
tacting your network administrator, and log in to the unit's assigned IP address.
8.
Log on to the Web UI (see directions in
).
9.
Note:
You'll likely want to change the default IP address of the
ETH ports you plan on using. This procedure is described in the
next topic . (You will need an
Ethernet cable
, or a
serial null
modem cable
for this.)
For more detailed information on network setup, see the section on
2.6
Accessing the Web UI
VelaSync's Web UI is the recommended tool to interact with the device, since it
provides access to nearly all configurable settings, and obtain comprehensive status
information without having to use the Command Line Interpreter (CLI).
You can access the Web UI either by using the manually set static IP address (
ETH0 =
192.168.1.1
), or by using the DHCP IP address automatically assigned during zero config
setup.
1.
Log into the Web UI as an administrator.
Note:
The default login credentials are:
User name
=
spadmin
Password
=
admin123
2.6 Accessing the Web UI
CHAPTER
2
•
VelaSync User's Manual Rev. 3
31
Summary of Contents for VelaSync 1225
