14215700-IG, Edition 15.0
May 2020, Original document
407
Users - Handset Configuration
Field
Setting
Handset Configuration Update
-
Automatic update
Enable (Optional)
Default value: Disabled
Enable this, if you want to make automatic update possible.
If enabled and new handsets are added to an existing
uploaded configuration group, these are automatically
updated after subscription has finished. Existing handsets
that are added to a configuration group are also auto-
matically updated.
If a handset configuration update takes place while being in
the menu on the handset, the user must exit menu and then
re-enter before changes are visible.
Note
: If using provisioning for uploading the Handset Con-
figuration XML file to the handsets, enabling automatic
update is required. This can be done either through the XML
configuration file or the web based Administration Page. For
more information, see Provisioning Guide.
System load (Optional)
Select relevant upload capacity. The load corresponds to the
number of maximum simultaneous updates.
Possible values:
Low
,
Medium
or
High
.
Default value: Medium
Note
: If you schedule an upgrade during day hours, you
would typically choose
Low
to
Medium
load to avoid any
impact on users. Upgrade after hours typically means no
user load, therefore, you can choose
High
priority.
Click
Save
.
Handset Configuration Files
Configuration Group
Information about the Group ID assigned to the user.
E.g.: 100
Version
Information about the version of the Handset Configuration
XML file.
Export
It is possible to view an existing configuration file located on
the server.
Select the relevant configuration group from the list, and then
click
Export
, if you want to export the Handset Configuration
XML file and view it in a text editor.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
