14215700-IG, Edition 15.0
May 2020, Original document
158
3. Click
Save
.
Spectralink IP-DECT Base Station Configuration Methods - Considerations
Decisions regarding Spectralink IP-DECT Base Station configuration depend on many factors, e.g:
l
system size
l
traffic load
l
base station density
l
location(s) - and physical distance between locations (overlap issues)
l
possible use of local media resources
l
possible use of multicast signaling
l
use of repeaters
To make the correct decisions, you must take into account both system capacity - including calls
(voice and MSF) - and location(s). Also to be considered, is the need for local media resources and
possible use of multicast signaling. To help you decide how incoming calls must be handled, see
"Flowchart for Deciding Base Station Configuration" on page 160
. The flowchart refers to the
options described below. The numbering of the options is equivalent to the most preferable paging
method, starting with number 1.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide