14215700-IG, Edition 15.0
May 2020, Original document
225
To Update Handset Firmware
1. Click
Users
, and then click
List Users
.
2. On the
User List
page, select the relevant user(s) from the list.
3. Click
Firmware update
.
4. On the
Handset firmware update
page, enter the following data:
Field
Setting
Handset firmware update - Options
Update time
Default value:
Now
. If you want to upload later, select an
appropriate time within the next 24 hours.
Update load
Default value:
Medium
Select relevant upload capacity. The load corresponds to
the number of maximum simultaneous updates.
You can select between
Low
,
Medium
or
High
.
Low
: 1 handset at a time.
Medium
: 4 handsets per
media resource.
High
: 16 handsets per media resource.
Example: 2 media resources and High load = 2*16 = 32
simultaneous updates.
Firmware file
The firmware file can be either a previously uploaded
default firmware file or a new firmware file chosen. A new
firmware file must be a valid firmware file with the exten-
sion .bin.
Select either
Default
or
Upload
.
5. Click
Start
.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
