14215700-IG, Edition 15.0
May 2020, Original document
98
Installing Spectralink DECT Repeater
This section describes the Spectralink DECT Repeater and how to unpack and install it. Installing
repeaters requires a software installation as well as a hardware installation.
Note:
Before you install the equipment, ensure that a site planner defines the location of the
repeaters.
The coverage depends on the construction of the building and the choice of building
materials.
The repeater does not add channels. It only adds additional coverage area.
For installations, the following items should be present in every box containing a Spectralink DECT
Repeater:
l
Spectralink DECT Repeater
l
Mounting template
l
Two mounting screws and anchors
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide