SpectraLink Corporation
Installation and Administration
NetLink OAI Gateway
5.4
Telephone Line Configuration
In an IP system, each handset that is to use OAI features must be configured with its
line number and MAC address. Optionally the name and extension number of the
handset user may be entered.
The system will not allow you to register the same handset to two different lines. Use
Esc to cancel out of any unwanted transaction.
Use the arrow keys to navigate to the name and extension fields and enter the
associated data.
•
MAC Address
The MAC address is printed on the sticker underneath the
battery on the handset. It can also be displayed on the handset by turning off the
handset, and then pressing and holding the
Pwr
(power) button. The MAC
address appears on the first line of the display (12 characters).
The MAC address must be manually entered by typing the entire address
including digits and colons.
•
Name
Enter the user name assigned to the telephone. This is for record
keeping only; it does not communicate the name to the PBX or the handset.
•
Extension
Enter the extension assigned to this telephone. This is for record
keeping only; it does not communicate the extension to the PBX or the handset.
Write the MAC address on the Wireless Planning Device Worksheet.
Repeat steps 2, 3, and 4 for each handset to be added or changed.
PN: 72-0078-07-B.doc
Page 22