SpectraLink Corporation
Setup and Administration–NetLink Wireless Telephone
(With SpectraLink Radio Protocol and NetLink Telephony Gateway)
Press the right arrow key to scroll through the options:
Default Key
: Enter the key # specified for use by the Wireless
Telephones. This will be 1 through 4.
Key Length
: Select either
40-bit
or
128-bit
depending on the key length
specified for use at this location.
Key 1-4
: Scroll to the key option that corresponds to the
Default Key
that
was entered above. Press 0 and enter the encryption key as a sequence of
hexadecimal characters. (Use the
2
and
3
keys to access hexadecimal
digits A-F, use the left arrow key to backspace.) For 40-bit keys you will
need to enter 10 digits, for 128-bit keys you will need to enter 26 digits.
The display will scroll as needed.
Encryption codes display as they are entered. For security reasons codes
will not display when a user returns to the Admin menu, Encryption
options.
Note that WEP may be set at “optional” at the access point if there are
wireless devices in use that do not have WEP capability. All wireless
devices must be upgraded to WEP capability for a fully secured WEP
environment.
Admin PW
The Admin PW (password) controls access to the administration functions in the Admin
menu. The password must be set in each Wireless Telephone for which controlled access
is desired. Wireless Telephones are shipped without any Admin menu password.
1. On the keypad, press
0
to change the password.
2. Enter the password. Press the first digit/letter of the password. The digit displays.
Press the key again to scroll through the letters associated with that key.
Example: if you press 2 repeatedly, you will see 2, A, B, and C, a, b, and c.)
The following table shows which key will allow you to enter non-numeric
characters or other characters not represented on the keypad.
To Enter
Press
. - _ ! # $ % & ‘ ( ) , : ; / \ = @ ~
1
Space 0
Q 7
Z 9
When the correct entry displays, press Right Arrow to move on to the next
character. Repeat for each digit/letter of the password.
3. Press
END
to save the entry and return to the menu.
Press
FCN
to abort and return to the menu without saving any changes.
PN: 72006509B.doc
Page 15
