SpectraLink Corporation
Setup and Administration–NetLink Wireless Telephone
(With SpectraLink Radio Protocol and NetLink Telephony Gateway)
If you press
END
with no entry, the password is erased and the display
will not require it before displaying the Admin menu.
3.2 User-defined
Preferences
The following user-defined preferences are also covered in the NetLink Wireless
Telephone user guide. The system administrator can refer to this list for more information
about customizing Wireless Telephone settings.
To configure the following options, the Wireless Telephone must acquire the system (the
NO SVC
icon must be off) and be at the extension display. Press and hold
FCN
briefly to
access the following options:
Select
Volume Level
from the menu to set the base audio volume level of this
Wireless Telephone. Select a level from 1 (softest) to 8 (loudest). Level 5 is the
default.
Select
Telephone
Ring
to change the standard ring used for normal operation.
From the
Telephone
Ring
menu, select either
Normal
Ring
(an audible alert) or
Vibrator
Ring
. The
Auxiliary
Ring
modes are reserved for future use. Vibrator
ring works only if this Wireless Telephone has the optional vibrating ringer. The
ring type currently in use displays with an asterisk (*).
Select
High Noise Mode
from the menu to select an option that describes the
noise level in your environment. This option will adjust the Wireless Telephone
to account for background noise. Use of the non-Normal Noise modes is not
recommended unless you are in a loud environment, or you may find it difficult to
hear on your Wireless Telephone.
Current IP Address
: displays the IP address currently assigned to the Wireless
Telephone. The IP address is not set here, it is merely displayed.
Select
Extension
to enter the user extension on the Wireless Telephone. Note
this number is for labeling purposes only, entering it does not assign the extension
in the host telephone system.
If a different language is supported on your system, select
Language
from the
menu to select a language for the display on the NetLink Wireless Telephone.
PN: 72006509B.doc
Page 16