page 10 of 12
Troubleshooting
PROBLEM
SOLUTION
The Pool light is flickering or
or lights up faint
Several pool lights in the pool
show different color programs
Make sure that all lamps are connected
to the same 12VAC power line. Execute
the synchronization procedure as ex-
plained on page 7.
•
Check the output voltage at the
transformer terminals. This volt-
age should be between 12VAC and
13VAC. Verify that the used trans-
former VA rating is sufficient for
powering all connected lamps
•
Verify if the cables that are used to
connect the lamps to the trans-
former are correctly dimensioned
(see tables p. 8-9)
•
Check if there are no bad contacts
or interruptions in the cables.
