2
EDG-13T KEY FEATURES:
• Nominal steady-state intensity of 6,500 µW/cm
2
at 15 inches (38cm).
• Large coverage area of 17.5 inches x 16 inches with a minimum
UV-A intensity of 1,000 µW/cm
2
.
• Less than 1.0 foot-candle (11 lux) visible light emission.
• Long-lasting UV-A Lenses.
• Cool running, fanless design.
• Multiple units can be ganged together, utilizing a single power source.
• Adjustable mounting bracket.
• IP65 Rated: The EDGE™ 13 Series lamps are protected from total
dust ingress and from low pressure jets of water (from all directions).
For more details, consult EN 60529 (British BS EN 60529:1992,
European IEC 60509:1989).
• The EDGE™ 13 is CE, CCC, RoHS, and WEEE compliant.
Meets EN ISO 3059 standards for non-destructive testing.
FIRST USE
• The EDGE™ 13 UV-A LED flood lamp is shipped factory set at the
specified intensity for optimal performance during inspections.
• Carefully unpack and inspect the lamp for possible damage during
shipment. If any damage is noted, immediately notify the carrier and
supplier before attempting to use the lamp.
• Make tests in a darkened area for best fluorescent response.
• Prior to plugging the unit into a grounded receptacle, ensure that
the power switch is in the OFF position. The EDG-13T lamps have a
two-position rocker switch (O = off and I = on).
• Push the power switch to the ON position. Instant-on operation ensures
that each of the UV-A LEDs reaches full intensity very quickly. Check to
see if the unit is operating optimally.
WARNING
UV emitted from this product. Avoid eye and skin exposure to unshielded products.
FOR PROFESSIONAL EXAMINATION USE ONLY
