2
ENVIRONMENTAL SPECIFICATIONS
The CLARITY 365 series lamps are designed to be safe under the following conditions:
•
For Indoor/Outdoor Use (dustproof and protected against water pressure);
•
Temperature 41°F to 122°F (5°C to 50°C);
•
Mains supply voltage fluctuations not to exceed ±10% of the nominal voltage.
IMPORTANT SAFETY INSTRUCTIONS (Read all instructions)
•
Do not operate the CLARITY™ 365 UV-A LED flashlight (SPN-CLR365) if it has been
physically damaged.
•
The flashlight must be fully charged before first use. Keep it fully charged at all times,
otherwise it will degrade the battery life.
•
Do not look directly into the light.
ALWAYS
wear the UV-absorbing protective glasses
provided when operating the flashlight. Use in low-light conditions to achieve the best
inspection results. The darker the room, the greater the fluorescent contrast.
NOTE:
Use only the battery charger packed with the flashlight. Do not attempt to use the
charger to recharge any other product.
•
Use only the specified Li-ion (Lithium-ion) battery for the CLARITY 365. See Replacement
Parts section (pages 6 and 7) for the specified battery design and part number.
•
The CLARITY 365 is not approved for use in hazardous atmospheres. Do not attempt to use
it in areas requiring explosion-proof lighting.
•
Never use this equipment in any manner not specified in these instructions because your
protection may be impaired.
•
NEVER
aim the flashlight in the direction of another human being.
It is meant for
professional fluorescent inspections ONLY!
•
DO NOT
attempt to modify the lens assembly or light output. Doing so may alter the
performance and intensity of the CLARITY 365, and render the item out of compliance.
CLARITY 365 OPERATION
•
The CLARITY 365 is shipped factory set at the specified intensity for optimal performance
during inspections.
•
Carefully unpack and inspect the flashlight for possible damage during shipment. If any
damage is noted, immediately notify the carrier and supplier before attempting to use the
lamp.
•
The CLARITY 365 has one button (on and off). Prior to using the unit, ensure that the
button is in the OFF position (no light illuminating from the flashlight). Press the button once
to turn the flashlight on. Instant-on operation ensures that the UV-A LED will reach full
intensity very quickly. Check to see if the unit is operating optimally. Press it again to turn the
flashlight off.
WARNING
UV light emitted from this product. Avoid eye and skin exposure to unshielded products.
FOR PROFESSIONAL EXAMINATION USE ONLY
CARE AND USE OF LITHIUM-ION (Li-ion) BATTERY
•
Do not allow the Li-ion battery to fully discharge frequently, since this will decrease the life
of the battery. It will work more efficiently on multiple partial discharges through regular use,
and frequent recharges.
•
The lamp may be left in the charging dock after charging. The charger automatically stops
the current when the charge is full.
•
Store in a fairly cool environment away from sunlight, heat, and humidity. Store the battery at
temperatures between 41°F - 68°F (5°C - 20°C).
NOTE:
The battery self-discharges during
storage. Higher temperatures (above 68 °F or 20 °C) will reduce the battery storage life.
Summary of Contents for SPECTROLINE CLARITY 365 Series
Page 8: ...8 ...
Page 16: ...16 ...
Page 24: ...24 ...
Page 32: ...32 www Spectro UV com 4 Dubon Ct Farmingdale NY 11735 866 230 7305 ...
