Introduction
28
Spectrum24 AP-4111 DS Access Point Product Reference Guide
Using the UI
The
UI (User Interface)
is a maintenance tool integrated into the AP.
It provides statistical displays, AP configuration options and firmware
upgrades. Access to the UI requires one of the following:
Telnet Client
Gain access to the AP built-in Telnet server from any interface
including remote Ethernet connections. See
Direct Serial
Connection
Acts as a DTE device to connect directly to a DTE device with
a null-modem serial cable. The direct serial access method
requires a communication program with ANSI emulation.
See
2.1.2 Using a Direct Serial Connection
Dial Up Access
The dial-up access method requires a communication
program with ANSI emulation on the remote terminal or PC.
The terminal or PC dials to an AP with a modem connection.
The AP supports connection to a Hayes-compatible
28,800-baud or faster modem. See
SNMP Via a MIB
Browser
Gain access to the AP SNMP function via a MIB Browser.
Typically a Network Manager uses this feature, however,
Symbol does not recommend AP access using this interface
method. Refer to the MIB Browser documentation for usage.
Web Browser
Gain access to the AP built-in Web server from any AP
interface including Ethernet connections. See
Summary of Contents for AP-4111 DS
Page 112: ...Monitoring Statistics 104 Spectrum24 AP 4111 DS Access Point Product Reference Guide ...
Page 120: ...Hardware Installation 112 Spectrum24 AP 4111 DS Access Point Product Reference Guide ...
Page 124: ...A 4 Spectrum24 Access Point AP 3020 Product Reference Guide ...
Page 126: ...B 2 Spectrum24 Access Point AP 3020 Product Reference Guide ...