Configuring the AP
60
Spectrum24 AP-4111 DS Access Point Product Reference Guide
3. Verify the values reflect the network environment. Change them
as needed.
4. To register settings select
OK
or
Save
to write changes to NVM. Selecting
Save
displays a confirmation prompt.
5. To save the
SNMP Configuration
information to all APs with the same
Net_ID (ESS), select
Save ALL APs-[F2]
.
This option saves the configuration changes for the current AP, and sends
two WNMP messages to all other APs on the
Known APs
table to update
their configuration and reset after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and same firmware versions.
6. To disregard any changes made to this screen and return to the previous
menu, select
Cancel-[ESC]
.
DHCP Change
If enabled, this trap generates the following enterprise-
specific traps:
•
Gateway Address change
Indicates the gateway address for the router has
changed.
•
IP Address Change
Indicates the IP address for the AP has changed.
•
IP Address Lease is up
Informs the user the IP address leased from the
DHCP server is about to expire.
Summary of Contents for AP-4111 DS
Page 112: ...Monitoring Statistics 104 Spectrum24 AP 4111 DS Access Point Product Reference Guide ...
Page 120: ...Hardware Installation 112 Spectrum24 AP 4111 DS Access Point Product Reference Guide ...
Page 124: ...A 4 Spectrum24 Access Point AP 3020 Product Reference Guide ...
Page 126: ...B 2 Spectrum24 Access Point AP 3020 Product Reference Guide ...