Configuring the AP
Spectrum24 AP-4111 DS Access Point Product Reference Guide
71
Change this only if the user or system/network administrator requires a new
file-name. The defaults are DSAP_FW.BIN and DSAP_HTM.BIN.
dsap_fw.bin or dsap_htm.bin
Ensure the file name is DSAP_FW.BIN and DSAP_HTM.BIN unless the user
changed the file-name.
Verify the path for the file name is accurate. (See step one)
7. Enter the TFTP Server IP address in the
TFTP Server
field.
8. Press ENTER.
9. Select
Save Configuration
to save settings.
If using telnet to connect to the AP via an Ethernet interface, do not use the
Use XMODEM to Update Access Point’s Firmware
option. This option causes
the AP to reset and look for the firmware file over the serial interface.
10. Select
Special Functions
from the
Main Menu
.
11. Select
Use TFTP to Update Access Point’s
and press ENTER.
12.
³
Are you sure (Y/N)?
´
Type “
y
´
The Telnet session ends when the user answers “
y
´
at the prompt
Summary of Contents for AP-4111 DS
Page 112: ...Monitoring Statistics 104 Spectrum24 AP 4111 DS Access Point Product Reference Guide ...
Page 120: ...Hardware Installation 112 Spectrum24 AP 4111 DS Access Point Product Reference Guide ...
Page 124: ...A 4 Spectrum24 Access Point AP 3020 Product Reference Guide ...
Page 126: ...B 2 Spectrum24 Access Point AP 3020 Product Reference Guide ...