14
Configuring the
Weather Station
with the Keypad
For the 2000
-
Series weather stations, SpecWare software is not
necessary to configure the station. The keypad can be used to
select all essential configuration options. Configurable parame-
ters are; sensor type, logging interval, Degree Day calculation
method and latitude and altitude (model 2900ET only). Configu-
ration through the software is necessary to change the station
name, enable/disable Disease Models or set parameters for the
Alarm Output Module.
The keypad sequences to set each parameter are as follows.
Setting the Logging Interval
If set for a 30
-
minute logging interval, the station can hold 183
days of data. Changing the logging interval will also change the
frequency that the station
’
s memory wraps around and writes
over older data.
5.
Use the arrow keys to scroll to the desired port.
6.
Press
Set
. LCD will return to the
‘
Current Values
’
screen.
1.
Press
Display
.
2.
Press
Set
.
Select Parameter
To Be Set
(↑↓)
4.
Press
Set
.
Set Log Interval
Interval=30 min
3.
Use the arrow keys to
scroll to the
‘
Log Interval
’
option.
SET LOG INTERVAL
Press SET