2
Specifications
2
General Overview
3
Components
3
Startup
4
Installing the Battery
4
Power-Up Sequence
4
Setting the Date and Time
4
Offloading Loggers/Stations
5
Transferring Data to the PC
6
Warranty
8
Contents
Software:
Spec8 Pro or greater; Spec 9 Pro 9.02 Build 0223 or greater
for use with WatchDog 1000 Series Loggers.
Compatibility:
See chart on page 3.
Capacity:
Can hold the maximum amount of data from 5 WatchDog
2000 Series Weather Stations, 10 Mini Stations, or 12 Loggers. Be-
cause it holds only the new data from any logger or station, it will hold
data from up to 25 loggers or stations.
Speed:
Offloads the maximum amount of data from a WatchDog 2000
Series Weather Station in approximately 22 minutes (depending on the
number of sensors in use). Partial offloads complete proportionately
faster.
Battery:
1 user-replaceable 9V alkaline battery. Battery life is about 6
months at idle. The battery is consumed at a greater rate while reading
and writing. A battery can process approximately 10 full shuttles. As a
rule of thumb, if the Data Shuttle display reads “30% FULL”, then 3% of
the projected battery life will have been consumed in transferring that
data from the logger/station and to the PC.
Specifications
Summary of Contents for WatchDog 1000 Data Shuttle Series
Page 1: ...PRODUCT MANUAL...
