3
Configuring SpecWare
To use the cable with SpecWare, you must first check your
communications configuration. From the SpecWare menu,
choose “File”, then “Preferences”, and then click the
“Communication” tab.
You must ensure that the
“Hardware Flow Control (RTS)” box is NOT checked.
In SpecWare 9, you must first click the “Advanced Options”
button on the lower right. The checkbox is just below
“Direct Connect Options”.
For older versions of SpecWare, the checkbox is in the top
center.
After unchecking the box, click “OK” to save the change.
