EU Declaration of Conformity
Spectrum Camera Solutions,
LLC
Spectrum Camera Solutions declares that under our sole responsibility that the product (s)
listed below conform to the relevant provisions of 2014/34/EU of August 29, 2018
Notified Body
FM Approvals Ltd. 1 Windsor Dials,
Windsor, Berkshire, UK. SL4 1RS
Product(s)
Network Ethernet Cameras
Model numbers
D Series
Dab-c-d-e. Network Ethernet Camera.
a = Housing length 1, 2, 3, 4 or 5 (or any three digits from 084 to 196 representing custom housing
lengths in mm).
b = Camera manufacturer code (two digits) 01 to 99.
c = Material A or S.
d = Several characters representing the camera manufacturer’s part number (may contain additional
dashes).
e = Optional breather/drain BLANK or BD. (IP67 is not applicable when supplied with optional
breather/drain).
Markings
II 2 G Ex db IIB+H2 T6 Gb Ta = -20°C to +55°C
II 2 D Ex tb IIIC T85°C Db Ta = -20°C to +55°C
Ratings
The D Series Network Ethernet Cameras can be supplied with a variety of cameras (in accordance
with EN 60950 or EN 62368) complying with the IEEE 802.3af, 802.3at, 802.3at++ or 802.3bt PoE (Power
over Ethernet) standard (57Vdc max). Voltage and wattage shall not exceed the maximum tested
configuration of 57Vdc (60W). The D Series Network Ethernet Cameras are rated for use in an ambient
temperature range of -20°C to +55°C and are IP66/67 (IP67 is not applicable when supplied with optional
breather/drain). The camera within the enclosure may be placed in any arrangement provided that an area
of at least 40% of each cross-sectional area remains free to permit unimpeded gas flow and, therefore,
unrestricted development of an explosion. Separate relief areas may be aggregated provided each area has
a minimum dimension in any direction of 12.5mm.
Compliance with the Essential
Health and Safety Requirements
has been assessed by reference to
the following Standards
EN 60079-0:2012 + A11:2013, EN 60079-1:2014, EN 60079-31:2014,
EN 60529:1991 + A1:2000 + A2:2013
Factory/Manufacturing Location
8935 Almeda Genoa Rd. Building B Houston Texas 77075
Conformity has been
demonstrated with reference to
the following documentation:
EU Type Examination Certificate (FM18ATEX0057X - 1)
Quality Assurance Notification
FM19ATEXQ0130
H. Lee Rice II
CEO
Date: July 15, 2019
Doc No. Dxx-100107152019
2014/34/EU
D201-1-Q6055 REV 4 105607312018 D SERIES
INSTALLATION MANUAL REV-1
27
