Spectrum DX3S User Manual Download

Page: 3 / 30

SPEKTRUM DX3S USER GUIDE

InTroduCTIon

Spektrum’s DX3S features an integrated telemetry system

providing accurate speed/rpm, temperature and voltage

readings. Featuring DSM 2.4GHz technology, the DX3S

offers sophisticated software combined with an easy-to-

use one-touch Rolling Selector making programming

quick and easy. Spektrum technology offers a bulletproof

radio link that’s immune to internal (noisy motors/ ESCs,

etc.) and external interfering sources. No longer will you

have to wait for a frequency or worry about someone else

being on the same channel. With Spektrum when you’re

ready to race there’s nothing stopping you!

ConTenTs

The DX3S radio system is supplied with the following:

• DX3S transmitter

• SR3300T receiver (SPMSR3300T)

• SR300 receiver (SPMSR300)

• Bind plug (SPM6802)

• 4 AA Alkaline batteries

• Receiver AA battery holder

• Switch harness

• Grip Set (SPM9006)

• Head Temperature Sensor (SPM1450)

• Battery/Motor Temperature Sensor (SPM1451)

• RPM Sensor (SPM1452)

• Sensor Mount Hardware .21-.26 (SPM1501)

• Sensor Mount Hardware .12-.15 (SPM1502)

• Sensor Mount Hardware Electrics (SPM1503)

• Telemetry RPM Sticker (SPM1512)

ModelMaTCh/bIndIng

The DX3S features ModelMatch (patent pending).

ModelMatch prevents a model from being operated when

the wrong model memory is selected. If the wrong model

memory is selected the receiver simply won’t respond to

the transmitter.

It’s necessary to program the receiver to a specific

model memory (called binding) so that the receiver

will only recognize and respond to that specific model

memory. See Page 16 for specific details on Binding and

ModelMatch.

sysTeM feaTures

• Integrated Telemetry

• One-touch easy-to-use programming

• Internal and programmable Up or Down timers

• 128x64 high resolution dot-matrix screen

• 10-model memory

• Travel adjust

• Exponential

• Throttle punch

• Steering mix

• Expert and standard modes

Dodge and HEMI are trademarks of

Chrysler LLC. Dodge Ram and its trade

dress are used under license by Horizon

Hobby, Inc. ©Chrysler LLC 2008.

www.pitstop-shop.nl

Summary of Contents for DX3S































Search results

Summary of Contents for DX3S

Reviews:

Related manuals for DX3S

Brands by name

Popular brands

Spectrum DX3S, User Manual

Search results

Summary of Contents for DX3S

Reviews:

Related manuals for DX3S

Brands by name

Popular brands