background image

21

Spektrum DX4r prO • tranSmitter inStructiOn manual

EN

What this Warranty Covers

Horizon Hobby, LLC (Horizon) warrants to the original purchaser 
that the product purchased (the “product”) will be free from 
defects in materials and workmanship for a period of 1  
year from the date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) cosmetic 
damage, (ii) damage due to acts of God, accident, misuse, 
abuse, negligence, commercial use, or due to improper use, 
installation, operation or maintenance, (iii) modification of or to 
any part of the product, (iv) attempted service by anyone other 
than a Horizon Hobby authorized service center, (v) product not 
purchased from an authorized Horizon dealer, or (vi) product not 
compliant with applicable technical regulations. 
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON 
MAKES NO OTHER WARRANTY OR REPRESENTATION, AND 
HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES 
OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES 
THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT 
WILL SUITABLY MEET THE REQUIREMENTS OF THE  
PURCHASER’S INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive 
remedy shall be that Horizon will, at its option, either (i) service, 
or (ii) replace, any product determined by Horizon to be defective. 
Horizon reserves the right to inspect any and all Product(s) in-
volved in a warranty claim. Service or replacement decisions are 
at the sole discretion of Horizon. Proof of purchase is required for 
all warranty claims.  SERVICE OR REPLACEMENT AS PROVIDED 
UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND 
EXCLUSIVE REMEDY. 

limitation of liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS 
OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARD-
LESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WAR-
RANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER 
THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall 
the liability of Horizon exceed the individual price of the product 
on which liability is asserted. As Horizon has no control over use, 
setup, final assembly, modification or misuse, no liability shall be 
assumed nor accepted for any resulting damage or injury. By the 
act of use, setup or assembly, the user accepts all resulting li-
ability. If you as the purchaser or user are not prepared to accept 
the liability associated with the use of the product, purchaser is 
advised to return the product immediately in new and unused 
condition to the place of purchase.

law

These terms are governed by Illinois law (without regard to 
conflict of law principals). This warranty gives you specific legal 
rights, and you may also have other rights which vary from state 
to state. Horizon reserves the right to change or modify this  
warranty at any time without notice.

WARRANTy SERvICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide 
warranty support or service. Once assembly, setup or use of the 
product has been started, you must contact your local distributor 
or Horizon directly. This will enable Horizon to better answer your 
questions and service you in the event that you may need any 
assistance. For questions or assistance, please visit our website 
at www.horizonhobby.com, submit a Product Support Inquiry, or 
call the toll free telephone number referenced in the Warranty 
and Service Contact Information section to speak with a  
Product Support representative. 

Inspection or Services

If this product needs to be inspected or serviced and is  
compliant in the country you live and use the product in,  
please use the Horizon Online Service Request submission 
process found on our website or call Horizon to obtain a Return 
Merchandise Authorization (RMA) number. Pack the product 
securely using a shipping carton. Please note that original boxes 
may be included, but are not designed to withstand the rigors 
of shipping without additional protection. Ship via a carrier that 
provides tracking and insurance for lost or damaged parcels, as 
Horizon is not responsible for merchandise until it arrives and is 
accepted at our facility. An Online Service Request is available at 
http://www.horizonhobby.com/content/_service-center_render-
service-center. If you do not have internet access, please contact 
Horizon Product Support to obtain a RMA number along with 
instructions for submitting your product for service. When calling 
Horizon, you will be asked to provide your complete name, street 
address, email address and phone number where you can be 
reached during business hours. When sending product into 
Horizon, please include your RMA number, a list of the included 
items, and a brief summary of the problem. A copy of your  
original sales receipt must be included for warranty consider-
ation. Be sure your name, address, and RMA number are  
clearly written on the outside of the shipping carton. 

NOTICE: Do not ship li-Po batteries to horizon. If you 
have any issue with a li-Po battery, please contact  
the appropriate horizon Product Support office.

Warranty Requirements 
For Warranty consideration, you must include your origi-
nal sales receipt verifying the Proof-of-purchase date.

 

Provided warranty conditions have been met, your product  
will be serviced or replaced free of charge. Service or  
replacement decisions are at the sole discretion of Horizon.

1-yEAR lIMITED WARRANTy

Summary of Contents for DX4R Pro

























Reviews: