Spectrum DX6 Instruction Manual Download

Page: 23 / 46

SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL





















SYSTEM SETTINGS

The System Settings menu consists of four screens:

System Settings, Extra Settings, Serial Number and Calibrate.

Select

to move between screens.

User Name

The User Name field displays your name in the lower right corner

of the main screen.

To Program a User Name:

1. Scroll to User Name and press the scroll wheel. The User

Name screen appears.

2. Scroll to the desired character position and press the scroll

wheel. Scroll left or right to change the character and press

the scroll wheel to save the selection. The User Name can

contain a maximum of 20 characters, including spaces.

3. Press the Back button to save the User Name and return to the

System Settings screen.

Contrast

To adjust the screen contrast:

1. Scroll to Contrast and press the scroll wheel.
2. Scroll left or right to adjust the contrast value. Lower numbers

lighten the contrast, higher numbers darken it.

3. Press the scroll wheel once to save the selection.

Backlight

The Backlight field adjusts the backlight appearance time and

brightness. You have the option to turn the backlight off for models

you fly during the day and turn the backlight on for

night flying models.

The backlight time options are:

Off:

Appears for a short time when you power on the transmitter.

On:

The backlight is always on.

Set Time:

The backlight is on for 3, 10, 20, 30, 45 or 60

seconds before automatically turning off. Press the scroll

wheel once to turn the backlight on.

The backlight percentage adjusts the backlight intensity and it

is adjustable in 10% increments from 10% (darker) to 100%

(brighter).

Mode

You can change transmitter modes among Modes 1, 2, 3

and 4. This conversion requires both a programming and a

mechanical change. Please refer to Transmitter Mode

Conversion for directions on making the necessary

mechanical changes. If mechanical changes are required for

the mode you need to change to, complete the mechanical

changes first, then follow the instructions below for the

software setting change.

To change the gimbal stick mode:

1. Scroll to Mode and press the scroll wheel.
2. Scroll left or right to change the gimbal stick mode. Press the

scroll wheel to save the selection.

3. Select

in the lower left corner until the Calibration

screen appears.

4. Move all transmitter controls to the center position and

complete the calibration process before exiting the System

Settings menu. See “Calibrating Your Transmitter” for more

information.

Battery Alarm

Battery Alarm enables you to change the transmitter battery

type and the alarm voltage limit. The alarm activates when

the battery reaches the low voltage limit.

To change the battery alarm:

1. Scroll to the battery type and press the scroll wheel once

to change the type to LiPo/Li-Ion or NiMH.

2. Scroll to the battery voltage and press the scroll wheel.

Turn the scroll wheel left or right to change the voltage

level. Press the scroll wheel again to save the selection.

CAUTION:

Never select NiMH when a LiPo/Li-Ion battery

is installed in the transmitter. Doing so may over-discharge

the LiPo battery and damage the battery, transmitter or both.

CAUTION:

Never adjust the low voltage limit for the LiPo/

Li-Ion battery pack below 6.4V. Doing so could over-

discharge the battery pack and damage both battery pack and

transmitter.





SYSTEM SETUP

Summary of Contents for DX6















































Search results

Summary of Contents for DX6

Reviews:

Related manuals for DX6

Brands by name

Popular brands

Spectrum DX6, Instruction Manual

Search results

Summary of Contents for DX6

Reviews:

Related manuals for DX6

Brands by name

Popular brands